PR Tail Wheel For The Eflite Carbon Z Cub or the Hangar 9 Carbon Cub 15cc

CARBON Z CUB

You will need to epoxy the inserts into place to provide a secure mount to your airframe; Refer to our blog for mounting instructions.

CARBON CUB 15CC

There is no alternate modifications necessary.  The tail spring is punched to the correct distance for you to bolt directly to the airframe.  The "T" bar is not shown, but is the same as our 1/4 scale tail wheel which you will need to screw in place to your rudder.  You are able to use your original mounting hardware.

The tail wheel assembly weighs approximately 5 oz.

$155

CARBON Z CUB                     CARBON CUB 15CC